Milton has grown fast. Neighbourhoods like Hawthorne Village, Willmott, Harrison, Beaty, Clarke and Ford are filled with townhomes, semis and detached homes built over the last two decades. Old Milton and Dorset Park add older homes near the town core.
Newer homes are built to tighter standards, but they still get attic mould. In townhomes, a shared roof can add problems you won’t find in a detached house.
Why Townhome Attics Are Different
- Shared roof, separate attics. Most townhome rows share one long roof, with firewalls dividing each unit’s attic. Ventilation may depend on how the whole row was built.
- Limited soffit area. Narrow units have short eaves, so there’s less room for soffit vents to bring in air.
- Roof vents shared along the row. If neighbours block their soffits or vents, airflow across the roof can change.
- Condo or freehold rules. In condo townhomes, the roof and attic may be common elements, so repairs may need corporation approval.
Common Causes in Newer Milton Homes
- Bathroom fan ducts that came loose or were never connected
- Insulation blown over the soffits with no baffles
- Unsealed attic hatches, often in a bedroom closet
- Pot lights and penetrations that weren’t air sealed
- Moisture from new framing and drywall drying out in the first year or two
What Each Season Brings
Winter
Moist indoor air leaks into the attic, condenses on the cold roof boards and freezes. Winds coming off the Niagara Escarpment can push air through gaps faster. Frost often concentrates above bathrooms.
Spring
Frost melts. Look for stains around bathroom fans and pot lights, and musty closets near the attic hatch.
Summer
Humid air trapped in a hot, poorly ventilated attic keeps moisture levels high. Upper floors that are hard to cool are a clue.
Fall
Check fan ducts, seal the attic hatch, clean eavestroughs and confirm the soffits are clear.
How Attic Mould Is Treated
- Assess. Health Canada considers a mould area under about 1 square metre small. A single patch over about 3 square metres is large and should be handled by a qualified professional.
- Check who’s responsible. For condo townhomes, contact your property manager first.
- Remove damaged insulation. Our attic insulation removal service in Milton clears out wet or contaminated material.
- Clean the wood. Surface mould is cleaned and the wood dried.
- Fix the gaps. Reconnect fan ducts, seal penetrations and the hatch, and install baffles. AeroBarrier air sealing seals hidden leaks from inside the home. Add a vapour barrier where needed.
- Re-insulate. Choose cellulose blown-in, fibreglass blown-in or spray foam insulation. 2 lb closed-cell spray foam works well over garages and in tight spots. Many Milton townhomes have rooms over the garage, so see our garage ceiling insulation service.
Replace damaged ceilings, and use moisture-resistant drywall in bathrooms.
Prevention for Milton Homes
- Have bathroom fan ducts checked
- Weatherstrip and insulate the attic hatch
- Keep soffits clear with baffles
- Air seal pot lights and penetrations
- Insulate to current levels (attic insulation in Milton)
- Inspect in spring and fall
Upgrades may qualify for rebates. See our home renovation rebate page.
Frequently Asked Questions
Can my neighbour’s attic cause mould in mine?
In a townhome row, shared roof ventilation means problems in one unit can affect airflow in others.
Who fixes attic mould in a condo townhouse?
It depends on your condo’s declaration. The roof and attic are often common elements, so contact your property manager first.
Why is my room over the garage cold?
Rooms over garages often have gaps in insulation and air sealing. Spray foam is a common fix.

